You can rest assured to buy customized N9962A FieldFox Handheld Microwave Spectrum Analyzer from us. We look forward to cooperating with you, if you want to know more, you can consult us now, we will reply to you in time!
Never Sacrifice Capability or Portability
N9962A FieldFox Handheld Microwave Spectrum Analyzer are equipped to handle your toughest working environments during routine maintenance, in-depth troubleshooting, and anything in between. Choose the Keysight FieldFox configuration that best meets your needs.
Make accurate spectrum analyzer measurements (± 0.5 dB) without warmup.
Capture intermittent signals with 10 MHz gap-free, real-time bandwidth.
Characterize radar pulse profiles with a portable solution.
Perform over-the-air measurements for 5G TF and LTE.
Capture I/Q data for RF signal monitoring and analysis.
Use GPS/GNSS for geolocation and timestamping.
Carry one lightweight unit at 3.2 kg (7.1 lb).
What's included:
AC/DC adapter
Localized power cord
Rechargeable Li-ion battery
Soft carrying case with backpack and shoulder straps
Quick Reference Guide
| Additional SA Based Features: | Real-Time Spectrum Analysis |
| Noise Figure Measurements | Over-The-Air Measurements |
| Built-In Power Meter | Extended Range Transmission Analysis (ERTA) |
| Applications: | AM/FM Tune and Listen |
| Field Strength Measurement | SCPI Code Compatibility |
| Spectrogram | Stimulus Response |
| 89600 VSA Software | Over-The-Air LTE FDD and 5GTF |
| Bandwidth Options: | 10 MHz |
| Cable and Antenna Analyzer: | No |
| DANL @1 GHz: | -159 dBm |
| Frequency: | 50 GHz |
| Instrument Type: | Spectrum Analyzer |
| Maximum Analysis Bandwidth: | 10 MHz |
| Maximum Frequency: | 50 GHz |
| Maximum Real-Time Bandwidth: | 10 MHz |
| Number of Built-In Ports: | 2 ports |
| Output Power: | Up to 4 dBm |
| Overall Amplitude Accuracy: | ±0.3 dB |
| Phase Noise @1 GHz (1 MHz offset): | -113 dBc/Hz |
| Phase Noise @1 GHz (10 kHz offset): | -111 dBc/Hz |
| Phase Noise @1 GHz (30 kHz offset): | -108 dBc/Hz |
| Power Measurement Using USB Sensor: | Frequency-Offset |
| CW or Swept-Frequency | RF Pulse Test with Peak Sensor |
| SA Start Frequency: | 5 kHz |
| Spectrum Analyzer: | Yes - Standard |
| Standard Attenuator Range: | 30 dB |
| Standard Attenuator Step: | 5 dB |
| System Features: | GPS Receiver - Internal Only |
| Remote Control Capability | Built-In DC Source |
| Type: | Handheld |
| TOI @1 GHz (3rd Order Intercept): | +13 dBm |
| Vector Network Analyzer: | No |
N9960A FieldFox Handheld Microwave Spectrum Analyzer
N9952B FieldFox Handheld Microwave Spectrum Analyzer
N9952A FieldFox Handheld Microwave Spectrum Analyzer
N9951A FieldFox Handheld Microwave Spectrum Analyzer
N9937A FieldFox Handheld Microwave Spectrum Analyzer
N9935B FieldFox Handheld Microwave Spectrum Analyzer
